Electric Hydraulic Pump Breakout Tong Hydraulic Breakout Tong

• After-sales Service: 1 Years
• Warranty: 1 Years
• Manufacturing Process: CNC Milling
• Surface Treatment: Spray-Paint
• Operation Pressure: Atmospheric Pressure
• Material: Alloy
• Model NO.: 50-300mm
• Standard: ISO
• Size: 40-300mm
• Torque: 40-200knm
• Type: Electric and Manual Power
• Transport Package: Wooden Box
• Specification: 80-150kg
• Trademark: JX
• Origin: China
• HS Code: 8431431000
• Production Capacity: 800sets/Years

Product Description

Product Description

This is practical new type of breakout tong, is an accessory equipment used in the directional crossing underground construction site.It includes hydro system and tong frame. The frame consists of mobile bar and (No 2 in the fig) and static bar (No. 1) which is paralleled with the mobile bar.There is a bracket in the end of the mobile bar, so the end of the static bar.There are also two bolts (No. 5) between mobile and static bars, through which the hydro cylinder is connected with static and mobile bars as a whole.The movable and static bars are both adopted with upper and lower clamps (No. 6) structure to adjust the dimension of the pipes outside diameter which is clamped. The suitable range of the outside diameter adjusted is Φ50-Φ300mm.

Detailed Photos

Product Parameters

No	Item	Data
1	HDD Hydraulic Drill Pipe Breakout Tong
2	Model of Breakout Tongs	HDD Breakout Tong.
3	Handling Size of Breakout Tongs	40-300mm
4	Break-out torque	40-200KN.M
5	Tighten Torque	40-150kN.M
6	Power of the breakout tongs	Hydraulic
7	PUMP TYPE	electric and Manual
8	Electric power station(volt/frenquency):	220-380V   50/60HZ
9	Weight of Breakout Tongs	50-150kg
10	Weight of Full hydraulic type	800-1200KG
11	Packing of Breakout Tongs	Wooden Box
12	Delivery of breakout tongs	5-30days

Features

1. suitable range: pipe Outside diameter: Φ50-Φ300mm .
2.Install the movable and static bars at the two sides of the screw (near the No. 6) respectively.Ensure the movable, static bars and hydra cylinder in the same straight line.
3.Connect the hydro cylinder to the hydro cylinder
4. Inject hydro oil through injector, and make the cylinder piston to act in a straight line and let the movable and static bars relatively rotate by which realize the breakout. (Note: to restore the cylinder through discharging the injector)