Drill Pipe Float Valve Sub Plunger Type F, Flapper Type G, Ga

• After-sales Service: Online Service
• Warranty: 12 Months
• Manufacturing Process: Forging
• Surface Treatment: Polishing
• Operation Pressure: Atmospheric Pressure
• Material: Cast Steel
• Model NO.: All Models
• Type: Float Valve, Plunger F Type, Flapper G, Ga Type
• Use: Downhole Safety Valves
• Repair Kit: Rubber, Metal, Spring, Valve Guide, Seals, etc.
• Transport Package: Standard Export Packaging, as Request
• Specification: 1R, 1F-2R, 2F-3R, 3F, 4R, 4F, 5R, 6F
• Trademark: JX PETRO
• Origin: China
• HS Code: 84314310
• Production Capacity: 5000 Piece/Pieces Per Month

Product Description

Product Description

Drill pipe float valves, or non-return valves, are downhole safety valves that create barriers to prevent unwanted flow of fluids up the drill string. The valve locks down the flow of fluids while the crew at the rigfloor is making or breaking connections.

 

The Model F Plunger Type Valve provides positive and instantaneous shut off against high and low pressure, assuring continuous control of fluid flow during drilling. For normal drilling operations, the durable Model F is the most economical choice and is available in all sizes. The "Heavy Duty" Model F Drill Pipe Float Valve is designed with a low alloy steel body that increases the life of the Drill Pipe Float Valve. It provides high impact resistance and is dimensionally identical to the standard Forum Drill Pipe Float Valve, allowing interchangeability of the trim. This type of Drill Pipe Float Valve is recommended for use with downhole mud motors.

The Model G "Flapper Type" Full Open Valve incorporates a specially designed flapper which opens quickly and fully to provide a completely unrestricted bore through the valve. The Model G is especially good for use with highly abrasive fluids. When circulation stops, the flapper closes instantly to prevent cuttings from entering the drill string and plugging the bit. The valve opens when the first joint is raised out of the hole assuring the first joints drain and are not pulled wet. The flapper-type valve complements primary blowout prevention equipment to provide complete internal pressure control.

The Model GA Differentail Pressure Monitoring Valve is identical to the Model G except for a hardened1/4 in. diameter tungsten carbide orifice bean insert in the flapper to provide automatic partial filling of the drillpipe during running in. This valve is used when monitoringthe bit head for gas pressure and/or gas pockets, allowing measurement of differential pressure when required.

Features

1. Available with a wide variety of sizes and end connections

2. Operating wrench and thread protectors included

3. Major repair kits available for every valve

4. Comes with certified test report

5. Identifiable open and close markings

6. Can be H2S corrosion resistant as per NACE MR0175
 

Drawing

 

Product Parameters

 

Model	OD mm (inch)	ID mm (inch)	Thread connection	Float valve
FZF83	82.6(3-1/4)	31.8(1 1/4)	NC23 B×2-3/8REG B	1R
FZF89	88.9(3-1/2)	31.8(1 1/4)	NC26 B×2-3/8REG B	1R
FZF105	104.8(4-1/8)	31.8(1 1/4)	NC31 B×2-7/8REG B	1F-2R
FZF121-1	121(4 3/4)	50.8(2)	3 1/2REG B×NC38 B	2F-3R
FZF127	127(5)	50.8(2)	3 1/2REG B×NC38 B	2F-3R
FZF121-2	121(4 3/4)	50.8(2)	NC38(B×P)	3-1/2 F
FZF165-1	165(6 1/2)	71.4(2 13/16)	NC46(B×P)	4F
FZF165-2	165(6 1/2)	71.4(2 13/16)	4 1/2REG B×NC50 B	4R
FZF178	178(7)	71.4(2 13/16)	4 1/2REG B×NC50 B	4R
FZF165-3	165(6 1/2)	71.4(2 13/16)	NC50(B×P)	5R
FZF203	203(8)	71.4(2 13/16)	6 5/8REG B×6 5/8REG B	5F-6R
FZF229	229(9)	76.2(3)	7 5/8REG B×7 5/8REG B	5F-6R
FZF241	241(9 1/2)	76.2(3)	7 5/8REG B×7 5/8REG B	5F-6R

 

 

Valve model	Vale dia. mm (inch)	Valve length mm (inch)	Hole Dia. mm (inch)	Sub Box thread
				Thread	Hole mm (inch)
1R	42.1 (1 21/32)	149.2 (5 7/8)	42.9 (1 11/16)	2 3/8REG	231.8 (9 1/8)
1F-2R	48.42 (1 29/32)	158.8 (6-1/4)	49.21 (1 15/16)	2 7/8REG	25.4 (1)
2F-3R	61.1 (2 13/32)	165.1 (6 1/2)	61.9 (2 7/16)	3 1/2REG	266.7 (10 1/2)
3F	71.44 (2 13/16)	254 (10)	72.23 (2 27/32)	3 1/2REG	266.7 (10 1/2)
3 1/2F	79.4 (3 1/8)	254 (10)	80.2 (3 5/32)	3 1/2REG	266.7 (10 1/2)
4R	88.1 (3 15/32)	211.1 (8 5/116)	88.9 (3 1/2)	4 1/2REG	325.4 (12 13/16)
4F	92.87(3 21/32)	304.8 (12)	93.66 (3 11/16)	4 1/2REG	325.4 (12 13/16)
5R	98.4 (3 7/8)	247.7 (9 3/4)	99.2 (3 29/32)	5 1/2REG	374.7 (14 3/4)
5F-6R	121.4 (4 25/32)	298.5(11 3/4)	122.2 (4 13/16)	6 5/8REG	431.8 (17)

 

Hot Sales Products

Our Advantages

Company Profile

FAQ

Q1. What is the advantage about your company?

A1. Our company has professional team and professional production line.

 

Q2. Why should I choose your products?

A2. Our products are high quality and low price.

 

Q3. The logo and the color can be customized?

A3. Yes, we welcome you to sample custom.

 

Q4. Any other good service your company can provide?

A4. Yes,we can provide good after-sale and fast delivery.