| Customization: | Available |
|---|---|
| After-sales Service: | 1 Years |
| Warranty: | 1 Years |
|
Still deciding? Get samples of US$ 1/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This is practical new type of breakout tong, is an accessory equipment used in the directional crossing underground construction site.It includes hydro system and tong frame. The frame consists of mobile bar and (No 2 in the fig) and static bar (No. 1) which is paralleled with the mobile bar.There is a bracket in the end of the mobile bar, so the end of the static bar.There are also two bolts (No. 5) between mobile and static bars, through which the hydro cylinder is connected with static and mobile bars as a whole.The movable and static bars are both adopted with upper and lower clamps (No. 6) structure to adjust the dimension of the pipes outside diameter which is clamped. The suitable range of the outside diameter adjusted is Φ50-Φ300mm.
|
No
|
Item
|
Data
|
|
1
|
HDD Hydraulic Drill Pipe Breakout Tong
|
|
|
2
|
Model of Breakout Tongs
|
HDD Breakout Tong.
|
|
3
|
Handling Size of Breakout Tongs
|
40-300mm
|
| 4 | Break-out torque | 40-200KN.M |
| 5 | Tighten Torque | 40-150kN.M |
|
6
|
Power of the breakout tongs
|
Hydraulic
|
| 7 | PUMP TYPE | electric and Manual |
| 8 | Electric power station(volt/frenquency): | 220-380V 50/60HZ |
|
9
|
Weight of Breakout Tongs
|
50-150kg
|
| 10 | Weight of Full hydraulic type | 800-1200KG |
|
11
|
Packing of Breakout Tongs
|
Wooden Box
|
|
12
|
Delivery of breakout tongs
|
5-30days
|
1. suitable range: pipe Outside diameter: Φ50-Φ300mm .
2.Install the movable and static bars at the two sides of the screw (near the No. 6) respectively.Ensure the movable, static bars and hydra cylinder in the same straight line.
3.Connect the hydro cylinder to the hydro cylinder
4. Inject hydro oil through injector, and make the cylinder piston to act in a straight line and let the movable and static bars relatively rotate by which realize the breakout. (Note: to restore the cylinder through discharging the injector)
){kind=link}