API 8c Kelly Pipe Hydraulic and Pneumatic Driven Kelly Spinner
Product Description
The kelly spinner is a device that uses a wind motor or a hydraulic motor as power to drive the kelly to rotate during the drilling process, and is used in conjunction with the rathole pipe clamping device (rathole pliers) to automatically complete the single connection. This special device has the advantages of safety, labor saving and high efficiency. Designed and manufactured according to API Spec 8C "Specification for Drilling and Oil Production Lifting Equipment".
|
|
Air/Pneumatic Kelly Spinner |
Hydraulic Kelly Spinner |
Detailed Photos
Product Parameters
Model |
A6C |
6600 |
6800 |
Drivel mode |
pneumatic |
Hydraulic |
Max. static load |
2250kN |
|
MPa |
0.5-0.9 |
0.5-0.9 |
13.8 |
Pressure |
Psi |
72-130 |
72-130 |
2000 |
|
Nm |
1500 |
1500 |
1650 |
Brake torque |
ft.lbf |
1100 |
1100 |
1215 |
Idle speed |
rpm |
130 |
130 |
110 |
Rotating direction |
18.6m3/min |
15 m3/min |
91L/min |
Air consumption/flow |
656 ft3/min |
529 ft3/min |
24 gpm |
Stem connection |
6-5/8 REG LH |
Size |
mm |
760×760×1225 |
740×710×978 |
740×710×978 |
in |
30×30×48 |
29×28×38.5 |
29×28×38.5 |
Weight |
kg |
540 |
500 |
504 |
lb |
1190 |
1100 |
1110 |
Relative Products
Company Profile
FAQ
1) How can I place an order?
A: You can contact us by email about your order details, or place an order online.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are using.
3) What's the order procedure?
A: First we discuss order details and production details by email or TM. Then we issue you a PI for your confirmation. You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit them to our customer or replace them in the next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into the next step production procedure.