API6A BX RTJ oil seal O ring joint pressure laser lens metal gasket sealing LCS SS304 SS316
Ring joint gaskets are made to withstand extreme pressures and temperatures while being used in highly corrosive environments. They meet or exceed API-6A specifications and are available in soft iron, low carbon steel, SS 304, SS 316 and other exotic alloys for specialty applications.
This metal ring pad is a solid metal gasket with cross-section octagonal shape made of metal material by forging and heat treatment and machining. It has the function of radial self-tight sealing and is a kind of standard R-type metal ring pad, which is based on the contact between the gasket and the inside and outside of the flange ladder groove (mainly the outer surface), and the sealing effect is formed by compaction. The octagonal metal ring pad is installed in the ladder ring groove of the flange surface. When the connecting bolt is tightened, the axial compression and the upper and lower ladder groove are tight, resulting in plastic deformation, forming a ring seal belt to establish the initial seal. after boosting the pressure, the radial expansion of the ring pad is made under the action of the medium pressure. Gasket and trapezoid groove slope more tight, produce self-tightening effect. However, the increase of the medium pressure will also deform the flange and the connecting bolt, resulting in the relative separation of the sealing surface and the relative decrease of the gasket sealing ratio, so the ring pad can be considered as a semi-self-tight seal. Octagonal metal ring pad and flange groove match is mainly face contact, compared with oval ring pad although not easy to close with flange groove, but can be used again, and because the section is made of straight line easy to process. At the same time choose octagonal metal ring pad material hardness should be lower than flange surface 15~20HB.
| CODE |
DESCRIPTION |
| MG-0R |
R-shaped oval pads, standard oval metal ring pads are used for flanges with standard grooves. |
| MG-R |
R-shaped octagonal pads, standard octagonal metal ring pads are used for flanges with standard grooves. |
| MG-RX |
RX type octagonal gasket, withstand pressure up to 700bar. This gasket is first used to contact the flange with the outer sealing surface. High system pressure will cause high base stress. RX metal ring pads are interchangeable with standard R ring pads. |
| MG-BX |
BX type octagonal pad, high pressure (up to 1500bar) BX type gasket is self-sealed by the internal system pressure generated by the pressure of the gasket base on the flange contact surface. This gasket is suitable for APIBX flange and tenon flange. |
1) How can I place an order?
A: You can contact us by email about your order details, or place an order online.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are used.
3) What's the order procedure?
A: First we discuss order details and production details by email or TM. Then we issue you a PI for your confirmation. You will be requested to do a prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients receive defective products?
A: replacement. If there are some defective items, we usually credit them to our customer or replace them in the next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into the next step production procedure.
){kind=link}
){kind=link}