API 11b Taper Thread Sucker Rod Drive Rod for Pcp Pump

• After-sales Service: Online Service
• Warranty: 12 Month
• Manufacturing Process: Forging
• Surface Treatment: Polishing
• Operation Pressure: Not Applicable
• Material: Alloy
• Model NO.: all model
• Machine Type: Oil and Gas Industry, Sucker Rod
• Processing Type: Forging
• Use: Oil Production, Oil and Gas
• Size: 16- 38mm
• Common Material: AISI 4130 4140 4330
• Length: API Standard Length or Customization
• Transport Package: Bundles and Woorden Package
• Specification: 5/8" ~ 1-1/8"
• Trademark: JX PETRO
• Origin: Dongying
• HS Code: 8431431000
• Production Capacity: 500 Tons Per Month

Product Description

Product Description

JX Petro Taper thread sucker rod (Drive Rods) and Pony Rods are manufactured from micro-alloyed, modified special quality hot rolled carbon or alloy steel. Bar and sucker rod dimensions and tolerances conform to API Spec 11B, latest edition, and AISI Steel Products Manual. It is a sucker rod designed specially for the PCP pump, and the taper thread is designed according to the drill pipe thread, which is applied to a high anti-twist thread on the rod thread.

Drive Rods for Progressing Cavity Pump application are available in 1" (25.40 mm), 1 1/4" (31.75 mm), and 1 1/2" (38.10 mm) body diameter and in 25' (7.62 m) lengths.

Features

1. All rods are straightened and inspected by Eddy Current/magnetic for surface defects.

2. Both ends are upset by automatic high-speed hot forging. Rods are full length normalized to relieve residual stresses, air-quenched, and tempered to refine and homogenize grain structure, and surface nor peened to remove any remaining heat treat scale.

3. All rods are also nor peened to improve fatigue life. Upset pin blanks are machined and dimensions gauged. Pin threads are cold-formed to strengthen the thread from fatigue.

4. An inhibitor-lubricant is applied to each pin and thread protector installed.

5. An oil soluble coating protects rods from atmospheric corrosion in storage.

6. All rods are bundled to prevent handling damage duringtransportation to the well location.

7. Quality control inspections are performed at each step of the manufacturing process.
 

Product Parameters

Dimension table : 

Drive Rod & Pony Rod 

Sucker Rod Nominal Value (mm)	Sucker Rod Nominal Value (in)	Rod Body diameter  (mm)	Rod End Size  (in)	Rod End Size (mm)	Length of Finished Product (mm)	Length of Finished Product (ft)
25	1	25.40	7/8	22.23	1000 2000 3000 7620 8000	2 4 6 25 26
29	1-1/8	28.58	1	25.40
32	1-1/4	31.75	1	25.40
38	1-1/2	38.10	1-1/8	28.58

Mechannical Propterty 

Grade	Tensile strength MPa	Yield strength MPa	Percentage elongation %	Contraction percentage of area %
D	795 - 965	≥ 590	≥ 10	≥ 50	Scuker rod & Drive Rod
KD	795 - 965	≥ 590	≥ 10	≥ 50	Scuker rod & Drive Rod
HL	965 - 1195	≥ 795	≥ 10	≥ 45	Scuker rod & Drive Rod
HY	965 - 1195	N/M	N/M	N/M	Scuker rod & Drive Rod

Chemical Composition of Common Sucker Rod Material 
 

AISI	C	Si	Mn	P	S	Cr	Ni	Mo	V	Cu	Al
1541	0.36-0.45	0.15-0.35	1.35-1.65	≤0.04	≤0.04	≤0.3	≤0.35	≤0.06	0.04-0.09	≤0.35	≤0.035
4120	0.17-0.24	0.17-0.37	0.4-0.7	≤0.025	≤0.025	0.8-1.1	≤0.3	0.15-0.25	/	≤0.2	/
4130	0.26-0.33	0.17-0.37	0.4-0.7	≤0.025	≤0.025	0.8-1.1	≤0.3	0.15-0.25	/	≤0.2	/
4138	0.37-0.45	0.17-0.37	0.9-1.2	≤0.025	≤0.025	0.9-1.2	≤0.3	0.2-0.3	/	≤0.2	/
4138M	0.37-0.45	0.17-0.37	0.9-1.2	≤0.025	≤0.025	0.9-1.2	≤0.3	0.2-0.3	0.04-0.09	≤0.2	/
4140	0.38-0.45	0.17-0.37	0.5-0.8	≤0.025	≤0.025	0.9-1.2	≤0.3	0.15-0.25	0.04-0.09	≤0.2	/
4142	0.38-0.45	0.17-0.37	0.5-0.8	≤0.025	≤0.025	0.9-1.2	≤0.3	0.15-0.25	0.04-0.09	≤0.2	/
3130	0.22-0.29	0.15-0.35	0.71-1.0	≤0.025	≤0.025	0.42-0.65	0.72-1.0	0.01-0.06	/	≤0.2	/
4320	0.18-0.42	0.15-0.35	0.8-1.0	≤0.025	≤0.025	0.7-0.9	1.15-1.5	0.2-0.3	0.04-0.09	≤0.35	≤0.035
4330	0.3-0.35	0.15-0.35	0.8-1.1	≤0.025	≤0.025	0.8-1.1	1.65-2.0	0.2-0.3	0.05-0.10	≤0.2	/
4621	0.18-0.23	0.17-0.37	0.7-0.9	≤0.025	≤0.025	≤0.35	1.65-2.0	0.2-0.3	/	≤0.2	/
4720	0.19-0.23	0.15-0.35	0.85-1.05	≤0.025	≤0.025	0.8-1.05	0.9-1.2	0.22-0.30	0.02-0.05	0.40-0.60	/

 

Packaging & Shipping

Sucker Rod Weight List
Size	5/8"	3/4"	7/8"	1"	1-1/8"	1-1/4"	1-1/2"
kg/m	1.68	2.4	3.2	4.2	5.3	6.4	9.5

• Package:
  • Metal pallet for saving space and convenient to transport.
  • Plastic paper covering the sucker rod and metal box covering the rod head and then metal pallet for better corrosion and abrasion resistance.
• Pallet size (L × W× H):
  • 7930mm × 550mm × 330mm
  • 8300mm × 550mm × 330mm
  • 9440mm × 550mm × 330mm
• Container size:
  • 40' GP (40' general purpose container).

Dimension	Length Ft.	Pieces/ bundle	Net weight KG	Gross weight KG	Total pieces
5/8"	25'	150	1930	1938	1920
	26'	150	1945	1953	1920
	30'	150	2210	2218	1690
3/4"	25'	100	1850	1858	1345
	26'	100	1865	1873	1334
	30'	100	2120	2128	1174
7/8"	25'	80	1920	1925	1039
	26'	80	2012	2017	991
	30'	80	2290	2290	897
1"	25'	60	1915	1923	780
	26'	60	2006	2014	744
	30'	60	2278	2283	657
1-1/8"	25'	50	2044	2052	609
	26'	50	2135	2143	583
	30'	50	2392	2398	521

Detailed Photos

 

 

 

Company Profile