Sucker Rod Polished Sucker Rod AISI 4330 4138 Hollow Rod

• After-sales Service: 1 Years
• Warranty: 1 Years
• Certification: ISO 9001:2000
• Condition: New
• Transmission: Mechanical
• Pumping Way: With Rod
• Type: Tower CNC
• Standard: API 11b
• Mtr: AISI4130 4140
• Other: AISI4330 AISI4138
• Spec.: Sm
• Transport Package: Wooden Box
• Specification: 16-42mm
• Trademark: JX
• Origin: China
• HS Code: 8431431000
• Production Capacity: 500000pieces/Years

Product Description

Product Description

Sucker rod is steel rod that manufactured according to API SPEC 11B with C, D, H and K Grades. It is used to connect the pumping unit on the ground and the oil well pump down in the well. Sucker rod is an important part in the oil production system. Different grades of sucker rod has features of high strength, non-corrosive medium, good tensile and long service life.
Types of sucker rode:

1. Ordinary sucker rod
2. Polished sucker rod
3. Pony sucker rod (pup joint)
4. Solid or hollow sucker rod
5. Sinker bar

Detailed Photos

Product Parameters

Size (in)	Rod D. (in)	Thread D. (in)	Length (ft)	Outside Diameter of Pin Shoulder (mm)	Length of Thread (mm)	Length of Wrench Square (mm)	Width of Wrench Square (mm)
5/8	5/8	15/16	2 4 6 8 10 25 30	31.8	31.75	≥ 31.8	22.2
3/4	3/4	11/16		38.1	36.5		25.4
7/8	7/8	1-3/16		41.3	41.28
1	1	1-3/8		50.8	47.63	≥ 38.1	33.3
1-1/8	1-1/8	1-9/16		57.2	53.98	≥ 41.3	38.1

Grade	Yield Strength	Tensile Strength Rm (Mpa)	Percentage Elongation A (%)	Contraction Percentage of Area Z (%)	Impact Toughness
	Rel (Mpa)				a(3/cm2)
C	≥ 414	620-793	≥ 12	≥ 55	≥ 70
D	≥ 620	794-965	≥ 10	≥ 505	≥ 58.85
K	≥ 414	620-793	≥ 12	≥ 55	≥ 70

Size (in)	Rod D.  (mm)	Length (ft)	Thread D. (in)		Thread Length (mm)		Small Diameter Taper of Thread
1	25.4	30 25 24 16	15/16		28.58		9°
1 Upset			15/16	1-1/16	31.75	36.5
1-1/8	28.6		15/16	1-1/16	34.93
1-1/8 Upset			1-3/16	1-3/8	41.28	47.63
1-1/4	31.8		1-3/16		34.93
1-1/4 Upset			1-3/8	1-9/16	47.63	53.98
1-1/2	38.1		1-3/8		44.45

Grade		Yield Strength Rel (Mpa)	Tensile Strength Rm (Mpa)	Percentage Elongation A (%)	Contraction Percentage of Area Z (%)	Impact Toughness ak(^J/cm^2)
1		≥ 414	620-827	≥ 12	≥ 55	≥ 70
2	General	≥ 586	655-1102	≥ 10	≥ 50	≥ 58.8
	Anti-corrosion	≥ 414		≥ 12	≥ 55	≥ 70

drawing sheet

company description