API 11b Grade D Grade Hl 4130, 4142 Sucker Rod Drive Rod Pony Rod with Sucker Rod Coupling

• After-sales Service: Online Services
• Warranty: One Year
• Manufacturing Process: Forging
• Surface Treatment: Polishing
• Operation Pressure: Atmospheric Pressure
• Material: Alloy
• Model NO.: All sizes
• Material Grade: AISI 4130 4140 4330
• Coating: Nickel-Chromium Painting
• Grade: D, Hl, C, K, Kd
• Capacity: 500 Tons Per Month
• Transport Package: Steel Frame
• Specification: 5/8" ~ 1-1/8"
• Trademark: JX petro
• Origin: China
• HS Code: 8431499900
• Production Capacity: 50000ton/Month

Product Description

API 11B Grade D AISI4130, 4142, 4138, 4320 Sucker Rod Drive Rod Pony Rod with Sucker Rod Coupling, centralizer

Product Description

Drive Rods and Pony Rods are manufactured from micro-alloyed, modified special quality hot rolled carbon or alloy steel. Bar and sucker rod dimensions and tolerances conform to API Spec 11B, latest edition, and AISI Steel Products Manual. It is used to connect the pumping unit on the ground and PCP. Sucker rod is an important part in the oil production system. Different grades of sucker rod has features of high strength, non-corrosive medium, good tensile and long service life.

Sucker Rods, Drive Rods and Pony Rods are manufactured from micro-alloyed, modified special quality hot rolled carbon or alloy steel. Bar and sucker rod dimensions and tolerances conform to API Spec 11B, latest edition, and AISI Steel Products Manual.

Sucker rods are available in 5/8" (15.88 mm), 3/4" (19.05 mm), 7/8" (22.23 mm), 1" (25.40 mm) and 1 1/8" (28.58 mm).

Drive Rods for Progressing Cavity Pump application are available in 1" (25.40 mm), 1 1/4" (31.75 mm), and 1 1/2" (38.10 mm) body diameter and in 25' (7.62 m) lengths.

1. All rods are straightened and inspected by Eddy Current/magnetic for surface defects.

2. Both ends are upset by automatic high-speed hot forging. Rods are full length normalized to relieve residual stresses, air-quenched, and tempered to refine and homogenize grain structure, and surface nor peened to remove any remaining heat treat scale.

3. All rods are also nor peened to improve fatigue life. Upset pin blanks are machined and dimensions gauged. Pin threads are cold-formed to strengthen the thread from fatigue.

4. An inhibitor-lubricant is applied to each pin and thread protector installed.

5. An oil soluble coating protects rods from atmospheric corrosion in storage.

6. All rods are bundled to prevent handling damage duringtransportation to the well location.

7. Quality control inspections are performed at each step of the manufacturing process.

Detailed Photos

 

Product Parameters

Sucker Rod & Pony Rod

Sucker Rod Nominal Value (mm)	Sucker Rod Nominal Value	Rod Body diameter	Pin Size	Pin Size	Shoulder OD	Shoulder OD	Wrench Square width	Wrench Square Length	API sucker rod length with coupling (mm/ft)
	(in)	(mm)	(in)	(mm)	(in)	(mm)	(mm /in)	(mm /in)
16	5/8	15.88	15/16	23.81	1.25	31.8	22.2(0.875)	31.8(1.250)	609.2    (2')
									1219    (4')
									1828    (6')
19	3/4	19.05	2001/1/16	26.99	1.5	38.1	25.4(1.000)		2438    (8')
22	7/8	22.23	2001/3/16	30.16	1.625	41.3	25.4(1.000)		3048   (10')
25	1	25.4	2001/3/8	34.93	2	50.8	33.3(1.313)		7620    (25')
29	2001/1/8	28.58	2001/9/16	39.69	2.25	57.2	38.1(1.500)		9144    (30')

Drive Rod & Pony Rod

Sucker Rod Nominal Value (mm)	Sucker Rod Nominal Value	Rod Body diameter	Rod End Size	Rod End Size	Length of Finished Product (mm)	Length of Finished Product (ft)
	(in)	(mm)	(in)	(mm)
25	1	25.4	7/8	22.23	1000	2
					2000	4
29	2001/1/8	28.58	1	25.4	3000	6
32	2001/1/4	31.75	1	25.4	7620	25
38	2001/1/2	38.1	2001/1/8	28.58	8000	26

Mechannical Propterty

Grade	Tensile strength MPa	Yield strength MPa	Percentage elongation %	Contraction percentage of area %
C	620 - 795	≥ 415	≥ 13	≥ 50	Scuker rod
K	620 - 795	≥ 415	≥ 13	≥ 60	Scuker rod
D	795 - 965	≥ 590	≥ 10	≥ 50	Scuker rod & Drive Rod
KD	795 - 965	≥ 590	≥ 10	≥ 50	Scuker rod & Drive Rod
HL	965 - 1195	≥ 795	≥ 10	≥ 45	Scuker rod & Drive Rod
HY	965 - 1195	N/M	N/M	N/M	Scuker rod & Drive Rod

Chemical Composition of Common Sucker Rod Material

AISI	C	Si	Mn	P	S	Cr	Ni	Mo	V	Cu	Al
1541	0.36-0.45	0.15-0.35	1.35-1.65	≤0.04	≤0.04	≤0.3	≤0.35	≤0.06	0.04-0.09	≤0.35	≤0.035
4120	0.17-0.24	0.17-0.37	0.4-0.7	≤0.025	≤0.025	0.8-1.1	≤0.3	0.15-0.25	/	≤0.2	/
4130	0.26-0.33	0.17-0.37	0.4-0.7	≤0.025	≤0.025	0.8-1.1	≤0.3	0.15-0.25	/	≤0.2	/
4138	0.37-0.45	0.17-0.37	0.9-1.2	≤0.025	≤0.025	0.9-1.2	≤0.3	0.2-0.3	/	≤0.2	/
4138M	0.37-0.45	0.17-0.37	0.9-1.2	≤0.025	≤0.025	0.9-1.2	≤0.3	0.2-0.3	0.04-0.09	≤0.2	/
4140	0.38-0.45	0.17-0.37	0.5-0.8	≤0.025	≤0.025	0.9-1.2	≤0.3	0.15-0.25	0.04-0.09	≤0.2	/
4142	0.38-0.45	0.17-0.37	0.5-0.8	≤0.025	≤0.025	0.9-1.2	≤0.3	0.15-0.25	0.04-0.09	≤0.2	/
3130	0.22-0.29	0.15-0.35	0.71-1.0	≤0.025	≤0.025	0.42-0.65	0.72-1.0	0.01-0.06	/	≤0.2	/
4320	0.18-0.42	0.15-0.35	0.8-1.0	≤0.025	≤0.025	0.7-0.9	1.15-1.5	0.2-0.3	0.04-0.09	≤0.35	≤0.035
4330	0.3-0.35	0.15-0.35	0.8-1.1	≤0.025	≤0.025	0.8-1.1	1.65-2.0	0.2-0.3	0.05-0.10	≤0.2	/
4621	0.18-0.23	0.17-0.37	0.7-0.9	≤0.025	≤0.025	≤0.35	1.65-2.0	0.2-0.3	/	≤0.2	/
4720	0.19-0.23	0.15-0.35	0.85-1.05	≤0.025	≤0.025	0.8-1.05	0.9-1.2	0.22-0.30	0.02-0.05	0.40-0.60	/

 

Company Profile

FAQ

1) How can I place an order?

A: You can contact us by email about your order details, or place an order online.

2) How can I pay you? 

A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are used. 

3) What's the order procedure?

A: First we discuss order details and production details by email or TM. Then we issue you a PI for your confirmation. You will be requested to do a prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you. 

4)How do you take care when your clients received defective products?

A: replacement. If there are some defective items, we usually credit them to our customer or replace them in the next shipment. 

5)How do you check all the goods in the production line?

A: We have spot inspection and finished product inspection. We check the goods when they go into the next step production procedure.