| Customization: | Available |
|---|---|
| After-sales Service: | Online Services |
| Warranty: | Online Services |
|
Still deciding? Get samples of US$ 3000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The CT100 series of Line Pull and Torque gauges are designed to be used during the makeup of drill pipe, drill collars, drilling tools, casing, and tubing. Provide a reading of "Line Pull" in kilograms, decanewtons, or pounds that can be conveniently converted to torque by multiplying the tong handle length.
The CT101 series of gauges make up casing and tubing and provide a direct reading in foot pounds or meters/kilograms. All systems consist of a Hydraulic gauge in either a 6" or 8.5" version equipped with a target pointer, a brass tong pull cylinder or compression cell, a high-pressure hose, a hand pump, and fluid. The target pointer is manually set to the desired torque; each gauge comes equipped with a Damper Block
which is used to dampen the signal to the point where the dial readout pointer does not fluctuate
01 OPERATIONAL DESCRIPTION
The hydraulic cylinder transmits a load indication to the indicator by transforming the applied pull to hydraulic pressure. This hydraulic pressure moves the bourdon tube which in turn drives the pointer to the applied pull indication.
02 OPERATIONAL PRINCIPLES
Both the CT100 and CT101 series of instruments operate on the same principle. Tension is applied to the load cell or in the case of a compression load cell a compression force is applied causing fluid in the load cell to be transmitted to the Bourdon tube in the gauge through the hose, this pressure causes the dial reading pointer to move and provide a dial indication of the applied load
| CTT101-03 |
| CTT101-26 |
| CTT101-65 |
| CTT101-85 |
| CTT101-92 |
| CTT101-09 |
| CTT101-42 |
| CTT101-45 |
1) How can I place an order?
A: You can contact us by email about your order details, or place an order online.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are using.
3) What's the order procedure?
A: First we discuss order details and production details by email or TM. Then we issue you a PI for your confirmation. You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit them to our customer or replace them in the next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into the next step production procedure.
){kind=link}